Showing posts sorted by date for query oil change. Sort by relevance Show all posts
Showing posts sorted by date for query oil change. Sort by relevance Show all posts

Friday, October 30, 2026

Don't overthink changing Royal Enfield oil

Measuring old oil drained from Royal Enfield.
By actual measure, you will get only 1.5 quarts of dirty oil from an old Royal Enfield Bullet.

 Incredibly, I disregarded my own advice, given in this column. Scroll to the end to learn the price I paid. 

What was it I used to find so fulfilling about doing an oil change on my 1999 Royal Enfield Bullet 500? 

I did a lot of oil changes, when I was a commuter, racking up 250 miles a week. 

You could say I just got so good at it that it was easy. 

But this was never true, and my garage floor still shows evidence of repeated oil spills from those days. 

Something always went wrong. 

Like the time I forgot to put the drain plugs back in place before adding new oil.

The most common mishap was that I would try to add the designated 2.25 quarts of fresh oil, and the oil tank would overflow.

This prompted me to wonder just how much oil I really needed to add.

Well, how much was I really getting out? My discovery, verified today, was that, left to drain for 24 hours, with both plugs pulled and the oil filter removed, only 1.5 quarts emerge to fill the catch  pan.

A (dirty) quart of oil apparently remains in the motor, where I will never see it.

Remember my mention of the time I failed to insert the plugs before adding oil? I vividly recall that the stream of oil that suddenly cascaded onto the floor was not instantly clean oil, but rather the inky black of old oil, forced out by the stream of new oil.

So, obviously, some old oil does remain in the oil tank, past the point where the dip stick can reach it.

Wooden dowel poked into oil tank.
Dowel poked into oil filler finds 1/4 inch of old oil still there.

As an experiment, today I poked a clean wooden dowel into the supposedly empty tank and found about 1/4 inch of old oil remaining. How much is that?

I was afraid you'd ask. So I tried to find out. And failed.

Using a squeeze bulb got out only a few drips, and the old trick of using a drinking straw as a pipette didn't work either.

Use squeeze bulb to remove oil from tank.
Squeeze bulb recovered only a few drips of oil.

This much I know: it took approximately 1.5 quarts of new oil to bring the level on the dipstick back up to near the "H" mark. You don't want to overfill it for fear of wet sumping.

Bottom line, get some fresh oil in there. Start with 1.5 quarts, run the motor and check the dipstick.

It's not rocket science. It's just a mess.

Here's what happened: After carefully adding back into the motor ONLY the amount that I had drained during this oil change, I fell victim to my own over caution. Preparing for the next ride I observed that the oil was only partway up the dipstick and I stupidly added an additional pint of clean oil. Naturally the Bullet wet sumped, producing a persistent cloud of smoke.

Royal Enfield Bullet in cloud of smoke.
Proof that i should have listened to my own advice!


Friday, August 22, 2025

Glory Day: The Super Meteor at Thruxton

Crew readies Royal Enfield for race.
This Royal Enfield Super Meteor set the pace in 1957.
 A sunny June day in Britain, and the silence of the Southampton countryside is broken; but not by the roar of fighter planes at the old RAF airfield at Thruxton. 

This is the sound of a 700cc Royal Enfield Super Meteor at speed. 

The Royal Enfield immediately jumps to an 80-yard lead over pursuing Triumph, Norton, BSA and Velocette competitors. 

It's the National Nine-Hour Race of June 29, 1957. 

Royal Enfield's performance that day was best summed up by reporter Roger Maughfling, in The Motorcycle News, Wednesday, July 31, 1957. 

His article was entitled "Nine Hour Super Meteor."

Bear that in mind: the racers at Thruxton that day ran for nine hours, at speeds that could exceed 100 mph. To win they would have to complete more than 200 laps of the airfield.

The runway portions of the course —naturally the fast straightaways — were by 1957 rough and weedy from lack of maintenance since the war.

Magazine article on 1957 Super Meteor.
The Motorcycle News applauded the "Nine Hour Super Meteor."
(Royal Enfield Owners Club Archive)
Here's Maughfling:

"One of the outstanding features of the recent Clubman's Nine-Hour race at Thruxton was the performance of the Royal Enfield Super Meteor entered by Lawton and Wilson, of Southampton, and ridden by Derek Powell and Brian Newman. Had it not been for a leaking fuel tank the Royal Enfield would most likely have scored an easy outright win.

"As it was, despite some twenty minutes lost effecting temporary repairs (not entirely successful) and the subsequent need to stop for refueling at frequent intervals because not more than a gallon could be carried before leakage from the crack in the top of the tank became pronounced, the Meteor finished second in its class and third in the race as a whole."

Maughfling subsequently got the chance to try that very Super Meteor racer for himself. A stock Super Meteor was capable of close to 100 mph. He found the racer capable of more than 115 mph, despite clubman rules requiring full road equipment, including working lights. 

"I was told that the increased speed was due largely to the use of 9:1 compression ratio pistons (available from the factory) to cleaning out the ports and to ultra-careful assembly. Because of the race regulations even the carburetor was the stock instrument with a bore of only one inch," Maughfling wrote.

This was race winning speed, and, luckily, you can watch the race highlights in a 20-minute Castrol Motor Oil film from the period. (Scroll down to the end of this blog item to watch the race on YouTube.)

The period film captures the courage and heartbreaking effort the leather-clad racers of the day put in. One rider pushed his motorcycle a mile in hope that a repair in the pits could put him back in the race.

It was a long and hot day. And then it started to rain.

Of the 43 starters, only 21 finished. The Royal Enfield Super Meteor was one of them.

Here's some of the play-by-play from the film:

"Powell's big Royal Enfield is going like a bomb. It's almost certainly the fastest machine out today. 

Royal Enfield in the lead.
Super Meteor in the lead.
"And Derek is riding in beautiful style. He's taking advantage of a clear track ahead and quite effortlessly widening his advantage over... the 500s. While the others are at Club Corner Powell is way along the curves leading up to Windy...

"It's a quarter-to-one and Derek Powell is still leading handsomely on his 19th lap. He's averaging well over 70...

Woman in skimpy dress.
Momentary distraction for cameraman.
"One hour gone and Derek Powell leads... 

"After an hour and 20 minutes Powell has a break and Newman presses on with the Royal Enfield."

Super Meteor in the pits.
Change of riders for Super Meteor.
"The Powell Newman Royal Enfield is still in trouble with a split tank. It's leaking like a sieve. Another tank is fitted but it's a botched up one that sprang a leak in practice. They're still second in their class but have covered only 73 laps...

Pit stop for Super Meteor.
Another fuel tank fitted, but it leaks too.
"Four o'clock the track is awash (with rain) and speeds drop... Another fill-up for the Powell-Newman Super Meteor...

"It's past 8:30 and the sun sinking low. Powell and Newman, Royal Enfield are third...

Royal Enfield in chicane.
Hanging on for third place.
"It's been a really tough race!"

Super Meteor takes the flag.
Super Meteor is flagged in third.
Now watch the whole show on YouTube.

Friday, February 28, 2025

V-twin, hand gearchange, foot clutch? Yes

Motorcycle gearbox has odd extra lever.
Can you see the little black pedal behind the kick-start lever? It operates the clutch. (Mecum Auctions Photo) 

 I had to puzzle over a feature I noticed in a photo of a 1930 Royal Enfield Model KL sold at the January, 2025 Mecum auction in Las Vegas. 

The 976cc side-valve V-twin sold for $27,500 at auction. Its description said that it had been used by a dealer in Oldham, UK, to collect motorcycles, using a sidecar. 

The big side-valve V-twin was "Royal Enfield's ideal sidecar puller," the auction noted. 

This machine was restored in the 1990s and was part of the David Silver collection. 

Its gearbox is a Sturmey-Archer three-speed. What caught my eye was a small pedal on the gearbox, obviously meant to be operated by the heel. 

It's not the brake pedal, or the kick starter, both of which are visible nearby. 

I wondered: could it be a neutral finder? Royal Enfields did come with gearbox neutral finder levers after World War II, but not in 1930.

After examination I concluded that the pedal on this Model KL (the "L" means it came with lights) operates the clutch. It serves as an auxiliary to the normal handlebar clutch lever, which is present on this machine.

I think I can see the little pedal connected to the same cable that appears to come from the handlebar clutch lever. I sure hope that is one strong cable!

My first thought was that such a feature would be rarely used. I supposed a rider would benefit from having both hands free, should he wish to wait momentarily at a crossing with the motorcycle in gear.

The Model K V-twin was often linked to a sidecar, and so it would have been easy to sit at a standstill with a heel on the lever and, say, refill the bowl of your pipe.

But that's wrong.

Clutches were meant to be used momentarily, while shifting gears, and no responsible motorcyclist would have sat with his foot on the clutch pedal, adding unnecessary wear.

Besides, imagine finessing the clutch engagement with your heel when moving off. Yes, you can do it nicely in a car with a manual gearbox, using the ball of your foot on the pedal. My heel is not nearly so exacting! I'd stall it for sure.

I don't think the this foot clutch was used to move off, but I think it nevertheless was a valuable feature, and probably led to a whole different style of riding. I imagine it went something like this:

No need to finesse the disengagement of the clutch -- just drop your whole leg on that pedal when you want to stop.

Remember, it's 1930: your gear shifting is done by your right hand, using the lever attached to the gas tank. Once your heel is on the clutch pedal, put the gearshift into neutral. You can now lift your right foot off the clutch pedal and push on the rear brake pedal, to bring the motorcycle to a halt.

(The little pedal had to be short, so as not to interfere with that rear brake pedal, which is also on the right side on this motorcycle.)

When it's time to move off, you again drop your leg onto the clutch pedal to disengage, move the gearshift into first, and firmly grab the (now slack) left-hand clutch lever; then lift your heel off the clutch pedal. Gently release your grip on the clutch lever, and off you go.

Thus the heel does the hard work and the left hand does the delicate job of letting in the clutch. I'm sure a skilled rider would eventually always use his heel this way, a real savings in effort.

Graham Scarth of the Royal Enfield Owners Club (UK) studies the factory records the club owns. He agreed that the pedal I saw is, indeed, a foot clutch, and added that a foot clutch is "listed against a few of the later 1,140cc KX machines."

Wait! This made me wonder if the little heel clutch pedal was a Royal Enfield factory item.

Let's cut directly to the answer: No.

I sent the photo of the auctioned motorcycle to Axel Winklebauer, of Germany, who is familiar with Royal Enfield V-twins, and other period motorcycles. He replied:

"I have seen such a short pedal on other vintage bikes of the '20s, but it is not original on an Enfield Model K."

1930 Model KX with short clutch pedal.
Licensed GO7815, this is the only 1930 Model K I've seen with the short clutch pedal. (Mecum Auctions Photo)

I've looked at photos and illustrations of 1930 Model Ks, and can see no other examples fitted with the short clutch pedal. Perhaps this was an accessory or an early owner's clever creation.

But Graham was correct: later Royal Enfield V-twins would get clutch foot pedals. These would be much more substantial, full-length pedals, operated by the toes.

And, sure enough, in the press clippings in the Royal Enfield Owners Club (UK) archives is a January, 1933 article from The Motor Cycle magazine, introducing the new 1,140cc big twin for 1933.

"Since strong clutch springs are required with this type of clutch when running in oil, a large leverage has been arranged and the clutch may be operated by either hand or by foot," the article says.

1933 1,140cc V-twin for foreign markets.
January, 1933 article in The Motor Cycle. Note that the hand gearchange lever is missing, moved to the left side. Clutch pedal is on the left, as well. Not clear how it connects to gearbox. (REOC Archives Clipping)

But wait a minute. Confusingly, the clutch pedal has shown up on a model not available in England, and on the "wrong side" of the motorcycle!

The same month, the other great British magazine, Motor Cycling, described the new 1,140 as "Especially for Overseas Riders and Police."

"It will definitely not be available in this country," the magazine advised UK readers. Instead, it was adapted to countries with "right hand rule of the road."

The hand gearshift lever had moved to the left-hand side of the tank on this "overseas" machine, and so had the foot clutch pedal.

Foot clutch pedal on left side of motorcycle.
Foot clutch pedal of the "overseas" 1,140cc V-twin, illustrated in January, 1933 Motor Cycling. (REOC Archive Clipping)

An illustration showed the foot clutch pedal on the left. It is clearly so long that it would have interfered with the rear brake pedal if it had been installed on the right.

The caption of the illustration specifies that an "auxiliary" hand lever was fitted as well.

Britain would have to get by without the 1,140cc version of the Royal Enfield V-twin. But not for long. 

And now the hand gearshift lever on the tank and the long clutch pedal would move to the right, as they should be, for Britain. The clutch pedal would displace the rear brake lever, which would move back to the left side of the motorcycle.

Photo shows how clutch pedal worked.
The clutch pedal is back on the right, and you can see how it worked. (KX Owner's Archive Photo)

Jan-Peter Mueller-Kose of the KX Owner's Archive sent me a photo of a later KX foot clutch pedal. If you study it you can see exactly how depressing the lever with the foot would operate linkage, alongside the handlebar clutch cable, to disengage the clutch.

Photo of 1938 foot clutch mechanism.
Another look at the foot clutch lever, from a March, 1938 publication. (REOC Archive Clipping)

More details came from Allan Hitchcock, of Hitchcocks Motorcycles, who provided the November, 1935 Royal Enfield engineering drawing for the foot clutch lever of the 1936 1,140cc Model KX. (Hitchcocks has a collection of the original UK factory's technical drawings.)

This drawing shows an overall length of 11 1/2 inches, or 14 inches if the lever was to be used with floorboards. Substantial, indeed!

Drawing shows design of foot clutch pedal.
Engineering drawing for 1936 Model KX clutch pedal. (Hitchcocks Motorcycles)

Motor Cycling's introduction of the new Royal Enfield models for 1938 gave this description:

"A foot clutch and hand change is fitted to the K and KX (deluxe) as standard equipment, but a hand clutch and foot change can be fitted for solo work only for one pound extra."

Note the reference to "solo work." The foot clutch really made sense only if you were hauling a sidecar. Riding solo, you'd prefer to have that foot available to put on the ground when you came to a stop.

Incredible how the motorcycle adapted over the years to the human body. We have only so many hands and feet; hands are flexible but weak, feet are powerful, but the heel will not dance like the ball of the foot.

Hitchcocks Motorcycles lists Part No. 23326 "Clutch Foot Pedal," but states it is "currently unavailable." As the engineering drawing shows, No. 23326 would be the long, 11 1/2-inch clutch pedal, not the mysterious little shorty that caught my eye in the Mecums auction.

Line up of 1938 Model Ks for police.
Line up of solo machines from a January, 1938 publication. (REOC Archives Clipping)

The big side-valve Royal Enfield V-twins were popular with tradesmen for pulling sidecars. Police liked them for their relatively high speed. (A solo 976cc model was advertised as capable of 70-75 mph on level ground.)

They would finish up in 1942, and not return after the war. With so many surplus military 350cc motorcycles on the market, most with overhead valves for power and fuel economy, the day of the Model K was over.

They must have been awesome to see, even more impressive to ride, and they still have their admirers.

Friday, February 14, 2025

Why do I enjoy oil changes so much?

 I changed the oil in my 1999 Royal Enfield Bullet. It's not clear to me when was the previous time I changed it. 

The last note I made of an oil change was just about exactly two years ago. That may be accurate. 

Well, I don't ride as much as I used to when I was a commuter. 

Anyway, the amount of oil regularly added to the motorcycle between changes (a lot) probably amounts to a sort of running oil change. 

The oil always gets black immediately on use; probably just the result of an old, unsophisticated motor.

Certainly the drained oil this time was very black. I didn't notice any silvery bits of metal in it but, then, I forgot to look closely. 

I didn't get the bucket properly positioned under the drain when I opened it, so there was a mess on the floor. Fortunately I had the motorcycle parked on cardboard, which soaked up most of the spill.

Then I spilled more oil just getting the multi-part oil filter out. It's not a spin-on. More like an athletic sock stuffed inside a kitchen sink strainer.

It should be returned to its housing soaked in clean oil. Getting it soaked was another mess on the floor.

And then I spilled still more oil emptying the bucket into an old plastic bottle to take to recycling. The funnel I'd chosen to use in this process had too small a spout, so it instantly overflowed. Luckily, again, onto the cardboard.

I went and got a bigger funnel.

The final spill (so far) came while putting clean oil into the oil tank. The oil compartment doesn't hold the full amount of oil specified in the owner's manual, so it overflows.

It's my theory that the oil has to be distributed into the filter and around the motor while running before there's room to get in the full proper amount of oil.

So there remain opportunities to spill yet more oil, in topping up. 

Luckily I make a practice of saving all the big cardboard that comes into the house. I will need it.

As a commuter, before I retired, I did oil changes regularly and I became pretty skilled at it.

Of course my practice then was to change the oil the night before I would ride to work in the morning.

That is the reason I didn't immediately go for a ride after this latest oil change: I don't associate changing the oil with immediately riding.

There is a satisfying feeling to having the job done. Yet more opportunities for satisfaction remain.

The gearbox oil is in a separate reservoir, and could use changing. The primary drive case requires another, separate, oil change.

Then the oily job of lubricating the final drive chain is certainly overdue.

 I feel as though I am saturating more cardboard than I am saving oil to be recycled. All this maintenance may be good for the soul, but not for the garage floor.

Friday, March 29, 2024

1948 Royal Enfield tells a powerful story

1948 Royal Enfield Model G in ad.
No science fiction time machine brought this Royal Enfield from the past.

 Surprisingly complete and original looking, a 1948 Royal Enfield Model G motorcycle advertised in Georgia has something special to offer: a back story. 

Vintage motorcycles often come with patina, but few come with the human history behind how they earned that patina. In this case, we know who owned this Royal Enfield, how they used it, and how much it mattered to them. 

This rare (at least in the United States) old Royal Enfield has something else very unusual to offer: incredibly low mileage for its age. Unsurprisingly, the seller figures it will run, with some tinkering. There is no reason it shouldn't. 

The Model G was Royal Enfield's first post-war 350cc motorcycle that hadn't worn khaki in World War II. Instead of camouflage, its tank and headlight rim glittered in chrome.

Hydraulically damped front forks replaced the wartime girders. That most modern convenience, the neutral finder lever, offered easier shifting. 

Front fender  doesn't need fender stays.
Model G was a thoroughly modern motorcycle for postwar era.

The unusually generous front fender was attached to the frame, not the wheel, leaving the front end free of fender stays, for a distinctive look. There were no less than three metal tool boxes, and the rear fender was easily removed for tire changes.

It was an era when Britain desperately needed to export goods to earn money to repay its war debts. This Royal Enfield Model G was exported in March, 1948, in care of Whitehall Distributors of New York City. Whitehall's decal still proudly adorns the rear fender of this Royal Enfield.

Whitehall Distributors decal on rear fender.
Whitehall Distributors brought Royal Enfields to Americans.

It's in the U.S. that this motorcycle's story, alternately joyful and sad, begins. The seller, Kirt, was good enough to share it with me. He virtually grew up with this motorcycle. The "Little Jo" registration plate on the front fender is a reference to his mother, Joyce.

Here is his story. He pulled no punches in telling it:

"Yes, the bike is original, untouched, still has the original tires.

"It comes with an interesting story.

"I inherited it from my mother; she received it from her father, my grandfather, when she was 16ish. He was a Indian rider and wanted someone to ride with .

"There are a few newspaper clippings around here of her and my grandfather after they rode up Mt. Chocorua in New Hampshire. I guess it was quite an undertaking back then, somewhere around 1949 or '50?

"In late 1949 or early 1950 she enlisted in the Air Force and shipped out to the West Coast; the bike was put up in my grandfather’s barber shop back room for storage.

"I learned about the bike when I was maybe 10ish? And I always thought it was very cool. I’m now 68.

"Flash forward to 1985.

"After my father’s death my mother moved back to the town she grew up in, Tamworth, N.H. and got together with her high school boyfriend. In 1985 I went to visit them and was anxious to see the bike I’d been remembering since my childhood.

"I picked it up from the storage room in the back of my grandfather’s barber shop and dusted it off, looked it over, changed the oil and put some fuel in it, then figured I needed to ride it. So I tried to bump start it and after only two times it started up!

"I remember I was so surprised it ran so well after having been sitting for over 35 years.

"I added a bit more fuel and took off down the road. Just so you know, Tamworth, N.H. is a real small town, small country roads, my grandmother was the postmaster there for 40-plus years so everyone knew her.

"So, as luck would have it, as I was motoring around (without any eye protection or a helmet) I get pulled over, right in front of the town COP’s house. Come to find out she was going home for lunch and I was in front of her! Can you believe the luck? 

"I told her the story behind the bike but that didn’t faze her and she still wrote me a ticket. No warning, A FULL-ON TICKET!

"It was still worth it! The attached picture is me in 1985 just after getting the Tamworth ticket.

Kirk and motorcycle in 1985.
Imagine finding and riding a treasured memory.

"I needed to head back after my visit, so I put the Royal Enfield under cover in her garage and thought all was good. (My mother had zero intention of giving me the bike even though she knew I would want it in a heartbeat.)

"Flash forward to 2009. My mother had decided to move from New Hampshire to Arizona. She had the bike moved along with her and her high school boyfriends’ belongings.

"I ended up purchasing a vacation home in Arizona the year after she moved there. When I finally got to see the bike again, I was completely disappointed, because the last time I saw it and rode it it was in just about museum gallery condition!

"I asked what happened to the Royal Enfield, why is it in such different condition than when I saw it in 1985? I was told her boyfriend didn’t want it stored in the garage and rolled it outside up next to the pump house and covered it with a piece of plywood! So, unbeknownst to me, it sat outside from 1985 until 2009.

"Flash forward to 2016. I was able to move from Seattle, Wash. to Arizona to finish my career out there and I purchased a home that was about 45 minutes from my mother’s home. I retired in 2018.

"My mother passed away in 2019. That is when I finally was able to wheel the bike home to my place.

"I asked my son if he would like it. Considering he only knew it in the condition it is in today he was very much excited to have it, so I shipped it to him in Georgia. At that time, he was a factory regional sales rep for Ducati and loved riding! He displayed the bike in his house, in the family room. It was great to see it being appreciated and how much he enjoyed looking at it and knowing its history.

"Flash forward to 2023.

"We received news our son had brain cancer and had only about a year to live. We sold the Arizona home and relocated to Georgia to spend what time we had left with him. He passed away this year in February.

"Every time I put eyes on it I get a pang of disbelief as to why it was put outside..."

I am sure that this is not the ending readers were expecting, or hoping for.

The physical objects that accompany us through life change in status. From a boy's wonder, to a young man's appreciation, to an adult's frank appraisal, perhaps.

There had to be an explanation for how this Royal Enfield survives, so complete and original, but with the patina of age. I say we are richer for knowing the answer.

Royal Enfield Model G seen from above.
Where will it go from here?

Friday, October 13, 2023

Self-portrait of a Royal Enfield Scram rider

Self portrait of a woman in a mirror.
The Royal Enfield Scram 411 isn't just for show-offs.

 Nicola Farr was kind enough to write in explaining why the Royal Enfield Scram 411 meets her needs as an experienced motorcyclist who has owned a good number of motorcycles. 

I was curious how the UK resident became such an avid motorcyclist. 

Many women ride, but, obviously, motorcycle makers including Royal Enfield would like even more women to get on two wheels. As the maker of "approachable," mid-size motorcycles, Royal Enfield has more interest in this than most. 

Here's Nicola's reply: 

"Around 1973 I traveled to the states with my mother as a kid; the cars were fantastic just like the movies -- great big things -- in fact everything was bigger in the states and cheaper as well! 

"The UK pound sterling went quite a way; I don’t remember, but my holiday money went a long way. (Ed: The Pound to Dollar rate reached $2.649 on March 6, 1972, highest since being allowed to float in 1971.)

"I bought a skateboard in Venice, California, but didn’t have a clue how everyone stayed on the things. I still have the skateboard come to think of it!

"Visiting the usual famous places, LA, San Francisco, San Diego; we went to Disney and rode the famous rides. I was a wide-eyed 11-12-year-old.

"We drove everywhere in a Pontiac GTO. (I didn’t realize what a cool car it was 'til years later.) It was a brown-gold sort of color. We hung wet towels from the windows when driving through the deserts.

"I had six weeks of adventure and fun camping out under the stars with no tent, playing in the surf while bigger kids and adults surfed the waves. Hiked trails and even went trick or treating at Halloween. I carved jack-o'-lantern pumpkins, something we didn’t do in the UK; we used turnips!

My taste for adventure was well and truly lit.

"Back in the UK I read about a man riding around the world. He was writing a weekly column of his travels. His name was Ted Simon and he was riding a Triumph 500 twin.

"I had seen plenty of motorcycles when on holiday traveling the freeways (usually overtaking us in the car) and being told not to wave at them, otherwise they could follow us and cause trouble. (They were innocent days back then.)

"I was used to seeing old men in army surplus trench coats on bikes that leaked oil in the streets of the UK going or coming back from work. It felt like the UK was always wet, damp and foggy with the smell of coal fires in the air. It was so far from the bright sunny days of my vacation in America, a totally different world from my experiences of growing up in Britain.

"As I got older I often remembered the man who rode around the world. I tried to get the school library to order in a book he wrote but I couldn’t remember his name or the book's name, so it stayed a distant memory not knowing what happened to him on the journey.

"At 16 I was old enough to have a 50cc motorcycle. I had been saving for a long time doing chores and paper rounds delivering the daily or evening newspapers on a cycle. The day finally came; the motorcycle dealer had arranged with my parents to deliver the moped the evening before my 16th birthday.

"It was a blue Suzuki AP50 and it was the best thing ever made. I was up at 4 a.m., dressed and out. Nobody was on the roads.

Suzuki moped.
A Suzuki moped like the one that put Nicola on two wheels.

"Well there was one vehicle, a battery powered milk float delivering fresh milk to everyone’s door step. Then the men who cycled to the railway works started to appear on the roads and the odd car, and a few British motorcycles taking their riders to work, and I was part of all this action on motorized transport and it was truly liberating!

"I learned to drive a car in six lessons and passed on my first attempt. My father was happy I was able to do what I wished, so long as it was safe! That included having a car and motorbike. He probably preferred me in a car than on two wheels but he knew I had a burning desire for two wheels. 

"I passed my motorcycle test and was able to ride larger motorbikes than the 250 Suzuki TS he had allowed me to have after much persuading and telling him I would do advance police training on the bike, which he made sure I attended!

"This was the end of the '70s and I was noticing the opposite sex at college, of course. I was drawn to the hippie kids and my studying suffered. Bikes and cars were sold and others bought or I was being taken around by others who had cars and motorcycles. My family really didn’t like me on the back of some lad’s motorcycle and actually preferred it if I was the one riding my own bike if I had to be on one.

"Being a parent years later I fully understand their thinking but at the time it was the cause of a few heated arguments. Years later with my own kids I again realized why!

"I discovered the missing book by Ted Simon in a book shop one day. It was called "Jupiter's Travels." I bought it and read it twice! I also bought "Wayward Angel" about the Hells Angels in Oakland, where I had seen bikers riding all those years ago while on holiday with my mother in America.

"I still ride today at the age of 62; the family of my own have grown up and fled the nest. My mother is now 93 and still tells me to let her know when I’m back home on my bike! Some things don’t change: like the care for your wild-haired child who rides a motorcycle when she shouldn’t!"

Friday, December 3, 2021

Here's an easy way to change oil in a Royal Enfield

Royal Enfield Bullet next to two oil jugs.
Why two big jugs of oil? One is empty so I can premeasure the oil to be added.

 It was time to change the oil in the motor of my 1999 Royal Enfield Bullet.

 I specify that it was time to change the oil in the motor because my old Royal Enfield also has oil in the gearbox and another kind of oil in the primary drive. Those would have to wait for next time; changing the oil in the motor is enough for one day.

 The motor alone has two drain plugs, not one, as you might expect. The oil filter is not a handy spin-off cartridge, but an oil soaked felt tube that must be inserted, dripping oil, into the motor.

But first the old oil and the old dripping filter must be removed. The first step in doing that is to round up every spare rag in the house, because I knew I was going to need them.

New oil filter gets a dunk in clean oil.
New oil filter gets a bath in clean oil before insertion.

The manual says the motor wants 2.25 liters of oil. I only understand "liters" as a measure of Coca-Cola. As in "one liter bottle of Coca-Cola will have lost all its fizz before I finish half of it."

So it was also time to renew my acquaintance with how many quarts there are in a liter, how many quarts there are in a gallon, how many cups there are in a half-gallon and how many cups there are in a quarter of a quart.

Luckily I have a system for this: I just ask my wife. She does all our cooking, so she is familiar with liquid measures.

The good news, for me, is that 2.25 liters turns out to be just a short distance from 2.25 quarts. Call it even. Easy!

And, as usual, I had a strategy in mind to make changing the oil even easier.

I always have a strategy for changing my Royal Enfield's oil, every time I do it. Just never the same strategy as, so far, no strategy has worked out very well.

Pouring oil from one jug into another.
I premeasured the oil by pouring it into the empty jug.

This time the great innovation would be that I would first measure out the amount of clean oil to be added to the motor once the old goo had vacated. This would avoid having to rely on the Royal Enfield dipstick, which I've discovered is wildly unreliable.

Why this should be so probably has to do with all the places oil has to find its way around to inside the Royal Enfield motor. If you fill an old Royal Enfield's oil tank to the "Full" mark on the dipstick, and go for a ride, you will find little or no oil showing on the dipstick next time you check.

More oil has to be added to the tank to account for the oil that gets distributed. More, but how much? There's no way to know.

Ah hah! You see, this time, with my 2.25 quarts of oil premeasured I would be able to fill the oil tank, to the Full mark on the dipstick, conserving whatever was left over in my container, and then, after the first ride, add the left overs to achieve the perfection of exactly 2.25 quarts circulating inside the motorcycle.

Oil jug marked for 2.25 quarts.
Oil jug includes a handy "window" to measure quantity.
Quarts on the left, liters on the right. Notice how close they are.

Minus whatever leaked out or got spilled, of course.

It didn't really work out. In my struggle with liquid measure I mistakenly marked my jug at the 2.5-quart mark instead of 2.25. I had pre-measured too much oil! Adding the remaining amount after the first ride would be a quarter of a quart too much. I would have to adjust.

I'll do it right next time.

Friday, October 29, 2021

Want no-mess oil changes? Get an electric motorcycle

Three-wheeled electric car.
When it's built, the Daymak Spiritus three-wheeler won't need oil changes. 

 Want to streamline the process of changing the oil in your classic Royal Enfield motorcycle?

 After lengthy experiments with coffee cans, milk jugs and drain pans, here are my picks for the two best ways to clean up your act when changing oil:

1. Pay someone else to do it for you; or

2. Buy an electric motorcycle. No more oil changes!

 I've blogged repeatedly about my experiments in making oil changes easier and less messy on my 1999 Royal Enfield Bullet. My Royal Enfield is the old Bullet, little removed from its original 1949 design.

Motorcyclists were Real Men in 1949, oil was always oily, and they tended to be in close contact most of the time.

Motorcyclists, one Real Man told me, wore oily jeans because there was no sense getting oil on your new jeans.

I bought my Royal Enfield because I wanted to travel back in time, not just ahead in distance. It turns out that not everything about visiting 1949 is very tidy. So be it.

I may not be a "Real Man," but I am a "Retro Man" to my oil-contaminated end.

I was encouraged in this by Paul d'Orleans, creator of the authoritative and wide ranging website "The Vintagent." He started it in 2006, as a blog; reading it taught me a lot about real vintage motorcycles, not simply retro ones like my old Bullet.

In 2016 The Vintagent expanded its reach to film, culture and, lately and perhaps most notably, electric vehicles. 

The things I love about The Vintagent are still there. Check out Paul's piece on a guy called "Paladin," a Real Biker and philosopher of the old motorcycle scene in San Francisco, oily jeans and all.

Far more up to date is "The Current," the section of  The Vintagent that covers modern, even futuristic electric vehicles. It explains itself this way:

"It’s an ever-evolving, even frantic, landscape of electric vehicles, and it can be tough to keep abreast of all the latest bikes, batteries, and news constantly flooding the market. That's why we’ve re-launched our weekly EV News Roundup to bring you cherry-picked stories that matter to you."

For sure, I didn't know any of this stuff, and much of it is jaw-dropping, even if some vehicles featured won't be on the streets this year, or next year.

One recent edition of The Current introduced me to the Daymak Spiritus, a three-wheeled (and thus maybe a motorcycle) two-seater. It's due in 2025, in two versions, one costing $20,000 and the other $150,000. The more expensive version is to have three-wheel drive and a 0-60 time of 1.8 seconds.

Both versions will offer a crypto-currency "suite." Not only will the vehicles enable you to pay as you go in crypto, they will mine Bitcoin in their spare time. I am not making this up; check the Daymak Avvenire website.

It also says the company has $1 billion in orders on hand, perhaps proving that The Current is really onto something electrifying.

You wouldn't have to change the oil. Hmmm. Maybe I could get used to that.

Friday, December 4, 2020

How to replace Royal Enfield clutch cable and get greasy

May as well admit it. My 1999 Royal Enfield left me with greasy hands one day recently and I couldn't be happier.

The occasion was the result of the broken clutch cable I wrote about earlier this year. At the time I simply removed the broken cable and installed the spare cable I carry on the motorcycle. All I needed to clean up from that experience was to wipe my hands with the clean rag I also carry.

But then, checking my supply of spare clutch cables, I realized I was getting low on extras, and decided something must be done.

This is where I was to get really slathered in grease and it took many more than one rag to clean up. The task left me with a big smile, because, I believe, motorcyclists secretly enjoy getting their hands dirty, no matter how many twists and turns it takes to solve a problem.

My first twist came when I thought I'd found the correct replacement clutch cable, advertised from India on eBay. I have never ordered a part from India that actually did fit. Nor have I learned anything, so I went ahead and spent my money. The cable that eventually arrived from India probably fits some Royal Enfield of the past, but not mine, not nearly.

My next plan was to have my broken cable repaired.

This looked easy, since the cable itself was fine. The problem is that the little nipple at one end, the gearbox end, had popped off the cable, the result of holding the clutch through thousands of gear shifts in Florida traffic. If the escaped nipple was replaced, or a matching one attached in its place, the cable would be fine.

I removed the outer gearbox cover of my four-speed Bullet and retrieved the lost nub. I was not surprised to find two loose lost nubs inside the cover. In 40,000 miles, clutch cable nipples on my motorcycle have failed this way repeatedly, at both the gearbox and the lever end.

The local Brit-bike mechanic said he could fix the cable. Come by anytime. So I brought the broken cable and its escaped nub over to his shop. He was out to lunch so I just dropped the package off with his daughter, who was minding the shop, and rode off.

My phone rang as I removed my riding gear at home. He'd never seen a clutch cable like mine, he said. The parts book didn't show it, he said. No way these little nubs could work, he said. It had to be wrong, he said. Bring in the bike so he could see what it should be like, he said.

I tried assuring him that my bike is just like it was when I bought it but quickly realized I should save my breath. He didn't believe me. So I put the helmet back on and went over.

There was much consternation as he insisted that the whole thing was totally wrong. Of course anything made the way my cable was would fail, he said, as the handlebar lever or gearbox clutch arm twisted off the cable ends.

But the motorcycle is exactly like it is and no amount of head scratching would convince steel to change its mind. Given this lever and this gearbox arm, the only cable that could connect them would be the one I had.

So he went ahead and soldered a new nub onto my cable, as I had hoped he might. I helped route the repaired cable into place on my motorcycle, a job that quickly descended into absurdity.

The mechanic lubricated the cable before handing it to me, so it shed super slippery goo as my motions caused the inner cable to saw back and forth in its outer cable. The adjuster at the midpoint of the cable was a virtual Exxon Valdez of oozing slime. The slipperier things got the more I had to push and pull to get the cable through the nest of wires behind the nacelle and into place behind the horn to the gearbox.

Thus my greasy hands, and pants.

The repair works fine, for now. But how long will it hold on before the next failure? That question arose in comments from readers. This came from John Donlon of Illinois:

"I don't like performing any service work on anything until I find out why the repair is needed to start with. If I discover I was the cause then I suck it up and deal with it, which means get out the wallet and my head out of my ass.

"In the case of the clutch cable, here is what I would do:

"No. 1, buy a Barnett clutch cable. They are the industry standard, not some crap from eBay  (with dubious claims of  being factory authorized) or something that 'looks about right'  from someone you not only don't know but carries merchandise of underdetermined origin... KNOW what you are buying.  Your life could and will depend on its performance. Yes, it is that important.

"No. 2, lube the new cable while it is still in the plastic bag. I use Marvel Mystery Oil and I ensure the actual cable in its jacketing sleeve is moving virtually friction-free. Do it before you install it. You can always wipe it off before routing it.

"No. 3, install and route the cable exactly as the factory workshop manual describes. Just because you found the defective cable routed a certain way does not mean it was routed the correct way; and it usually wasn't (seriously).

"No. 4, make your throw-out cable adjustments as the factory workshop manual instructs. 

"No. 5, lubricate the cable periodically as directed by the factory workshop service manual and make adjustments as needed. If it was installed correctly, you probably will never have to adjust.

"Now get to work and sin no more."

Something similar came from Maynard Hershon of Colorado:

"Today's cables are everlasting, I'd say. They are nylon-lined and stainless steel. The ends are swadged on and never come off. Some bikes with 100,000 miles on them are still on original cables. If you have been buying OE cables, get them elsewhere, like Barnett ones or those good ones from the UK. Whatever cables you've been getting are not good enough. And make sure you are not pulling the clutch lever so far that you are stretching the cable itself, not pulling against the clutch springs. I'm not explaining that well, but I hope you see what I mean. 

"And because I came up on old British motorcycles, I NEVER sit at traffic lights in gear with the clutch pulled in. If you did that in the old days, you only had a clutch once or twice. After that, you coasted up to lights because you could not stop. The clutch would not disengage. Your bike was never designed to sit for two or three minutes with the clutch lever pulled to the bar. No one in the old days would have done that."

And then there was this, from Chennai Wrencher:

"If a guy takes a file and rounds the shoulder of the lower nubbie a bit before using it, it can then swing somewhat in the actuator arm, reducing the bending forces on it which cause the fatigue failures. A bit of grease on the nubbie there, and a bit more at the lever end socket cut down on quite a bit of friction. I like the Hitchcocks heavy duty cables, but you do need to pre-fit them to make sure they aren't too tight in the fittings. The better 'feel' alone is worth the cost to me. Cheers!"

That mirrors something Allan Hitchcock of Hitchcocks Motorcycles mentioned in his email to me, where he tipped me off to the replacement cable I need:

"I have attached a photo of the end of our cable. There is the top hat outer cable ferrule which locates in the case of the gearbox (the originals had a crude domed ferrule). This looks to have a bigger diameter shoulder to the ones in your photo, which will prevent it pulling through.

Close-up photo of gearbox end of clutch cable.
The Hitchcocks Motorcycles clutch cable looks right.

"The nipple can be a plain barrel or have the extra nib, but should have a radiused end to locate in the lever at the gearbox lever as on our photo.

"However, one discrepancy we have found between the gearbox levers is the diameter where the extra nib would locate; some will fit straight in where other levers would need opening out."

Sounds as though I will be getting my hands messy again soon.

Friday, October 16, 2020

Ways to remember when to fill up your Royal Enfield

Five-digit counter with knurled wheels to set mileage.
If you owned an old Volkswagen, then you may know what this is.
Most people won't recall, but there was a time when automobiles came without gas gauges.

You could put a stick down the filler opening to see if it came out wet. Ford dealers offered purpose-made measuring sticks for their customers, with the dealership's name on them.

Or, if the car had a "Reserve" setting, you just waited until the engine coughed and switched the lever to access just a bit more gas.

This is still the way my 1999 Royal Enfield motorcycle operates. There's no gas gauge and no trip odometer to tell how far you've gone since your last fill-up.

If you wait until the motor coughs you might find yourself groping blindly under the seat for the Reserve lever while in the middle of a busy intersection.

My blog item on an easy way to remember when gas is needed brought plenty of response. Some who wrote thought I ought to hang up my helmet if I couldn't remember when gas is needed. Ouch.

Others seemed to think I'm a lout because I don't always check the gas level before riding.

"If you don't check your fuel level then don't ride any farther than you intend on pushing it," Oldjohn1951 wrote.

Or I am a careless lout because I don't automatically fill up after every ride (prevents getting stranded and corrosion in the tank as well).

Just buy a grease pencil and write the desired mileage on the face of the speedometer, ran another suggestion.

More sympathetic was the friend who suggested I use a stitch-counter from a knitting needle to remember at what mileage to get gas. I'm a lout to think that this seems a bit — well — feminine for my masculine motorcycle.

"I used suitcase combination locks to keep track of my next fill-up mileage," wrote Darrel Bedwell.

That I liked. Maybe the lock would be made of metal, in keeping with the rest of my motorcycle.

Then, to my surprise, there came a comment that really made sense.

Remember that cars used to come without gas gauges, or trip odometers, even if they had odometers?

So the problem of keeping track of when to buy gas was, at one point in history, a very common problem? What solution did those drivers of old find?

Well, they had one. "Bilgemaster" pointed to an accessory odometer counter still made in Germany.

One reviewer wrote of it:

"Years ago, some Volkswagens and other small cars had no fuel gauge. These counters were popular to remind the driver when to buy fuel. Now, they are almost impossible to find. I am using the two I bought in cars that have fuel gauges, but do not have trip odometers to remind me of when to change the oil. You could just use a sticky note, but this thing is more fun."

Another wrote:

"Just what I was looking for. Put it on my scooter. I use it as a trip odometer on the right three digits and as a gas minder on the left two digits. In the '70s I had this in my VW Beetle. Great product."

And another:

"Excellent product, good quality. My gas gauge in my '73 Thing is not working at this time. I had one of these in all my old VWs before they came with a gas gauge. Easy fix for now. Authentic, made in Germany."

So there you have it. A certified piece of vintage kit, still made the old way.

Now, I realize that there are much higher tech ways to accomplish this. Just set a reminder on your Apple Watch, for instance.

But I maintain that, if you ride an old Royal Enfield, "higher tech" is not the goal.

Friday, August 7, 2020

Royal Enfield oil filter: Which diagram is right?

Diagram of Royal Enfield oil filter assembly.
There's something funny about this illustration from
the owner's manual of my 1999 Royal Enfield Bullet.
If you own an old-fashioned, iron-barrel Royal Enfield Bullet motorcycle, you know that changing the oil filter is a messy job. Instead of a modern spin-on oil filter, you have a filter "element" that fits inside a housing in the side of the motor.

It is held in place by a spring-loaded cover and associated washers and nut.

Your owner's manual explains how to put all these bits back together. In a blog item here in 2008 I noted one oddity in the diagram shown in the owner's manual of my 1999 Royal Enfield:

The spring in the cap bears directly on a delicate felt washer!

The felt washer in turn is on top of a metal washer that would likely better withstand the pressure of the spring. Shouldn't these two be reversed, to put the spring pressure directly on the metal washer?

If so, is that a typographical error in the manual?

Well, if it is, my dealer didn't balk at it when he changed the oil. That's the way I found the pieces arranged when I did my own first oil change.

And I have done it this way, ever since, despite a friendly warning from a reader that I had it wrong. I have always wondered whether I am right or wrong.

Then, recently, I came across an eBay ad for a 1954 owner's manual for a Royal Enfield 250cc Clipper. Despite its age, the design of the 1954 Clipper is related to my 1999 Bullet.

(Proof that my motorcycle is a true antique, although still only 21 years old.)

Diagram of Royal Enfield oil filter assembly.
This illustration from the 1954 owner's manual shows
the metal washer between the spring and the felt washer.
Sure enough, the oil filter diagram in the 1954 manual shows the felt washer belongs beneath the metal washer, where it is protected from the spring.

Which manual is correct, 1954 or 1999? Does it matter? I don't know.

In 2008 I wrote that reversing the order of felt and metal washers resulted in a leak. But I now question how anything could have leaked past that firmly attached spring cap.

I guess I will have to it try again.

Your comments are invited, below.

Friday, April 3, 2020

'58 Indian Patrol Car with Royal Enfield Interceptor motor

Custom Indian Patrol Car with Royal Enfield Interceptor motor.
Once purely a utility vehicle, this 1958 Indian Patrol Car became a Royal Enfield hot rod.
Hatfield Powersports of Phoenix, Ariz. has for sale on eBay a customized 1958 Indian Patrol Car powered by a 1964 Royal Enfield Interceptor motor.

Dubbed "The Royal Rickshaw," this custom tricycle motorcycle was featured in the February, 1973 edition of Custom Chopper magazine.

According to the eBay ad it "is a one-off work of art from Southern California in the early '70s."

"Buy It Now" price is $6,995.

Custom Indian Patrol Car with Royal Enfield Interceptor motor.
The big Royal Enfield Interceptor motor dominates the look of this custom tricycle. 
The Royal Enfield tricycle comes with the trophies it won, and even the Indian Patrol Car tow hitch that let garages pick-up and return customers' cars. The mechanic would ride the trike to the customer, pick up the car, and tow the trike back to the dealer. After the oil change, lube job, and tune-up, he'd tow the trike back to the customer, deliver the car, and ride back to work.

Patrol Cars were also used by traffic police officers and meter maids.

Close-up of "Coors beer" on shift knob.
Hand-shift quadrant puts Neutral all the way back. There is no reverse.
This customized Patrol Car still has its foot throttle and tank shift, but the gearbox is the four-speeds-forward box of the Interceptor instead of the original, which would have had first gear replaced with a reverse gear.

(Overall gearing would have been reduced to compensate for the loss of first gear, making the Patrol Car — originally powered by a 350cc Royal Enfield single — very slow. The 750cc twin-cylinder Interceptor motor must be quite an improvement.)

Shiny Royal Enfield Interceptor motor and gearbox.
1964 Royal Enfield Interceptor motor gleams.
The complicated history of this tricycle motorcycle is detailed in the 1973 Custom Chopper article. The magazine explains that from 1955-1960, Royal-Enfield motorcycles from Britain were marketed in the United States, badged as Indian motorcycles and sold through Indian dealerships.

At the time, in Britain, a company named Pashley used Royal Enfield front-ends and motors to build tricycles for business use. One of these hybrids ended up, badged as an Indian Patrol Car, at an Indian dealership in San Diego, Calif.

Photo of the Indian Patrol Car as it was found.
The Patrol Car in as-found condition.
It didn't sell. Dealer George Beseler eventually began using it as a mini-pick-up truck.

It ended up in the back of the lot, and decay set in. It wasn't sold until Ed Thompson spotted it beneath a pile of junk, and become its first registered owner. Restoration and customization took four years.

As a custom with a highly polished motor, it started winning awards, and it comes with quite a collection of trophies.

Advertisement for "Completely New" Indian Patrol Car.
Indian had a Patrol Car of its own to compete with the Harley-Davidson Servi-Car.
What was "Completely New" was that now it would be a Royal Enfield at heart.
Period Indian and Pashley ads tell us what the original Indian Patrol Car looked like, but they would  have been very rarely seen in the United States.

The frame number BR015 on this Patrol Car "is a Pashley chassis number," according to Graham Scarth, chairman of the Royal Enfield Owners Club UK.

"Their records do not appear to have survived, so we don't know how many they made."

Rear of custom Indian Patrol Car.
Royal Enfield enthusiasts will appreciate the "Shell Motors" license plate surround.
Shell was a famous California distributor for Royal Enfield back in the day.
It's not clear to me how practical this custom Patrol Car may be, with three times its original horsepower and no reverse gear (be careful how you park it, and don't plan on any three-point turns in traffic).

But it sure is a looker. Hatfield Powersports can be reached at 480-848-1769. Here's a video of the custom Indian Patrol Car running. Note the operation of the foot throttle.